Say hello to GB/s : The Next Evolution of Solid State Drives
MyDigitalSSD Bullet Proof eXpress (BPX) 80mm (2280) M.2 PCIe 3.0 x4 NVMe SSDs are changing the conversation from MB/s to GB/s - unleashing sequential read/write speeds over 4X faster than SATA SSDs at a blistering 2.6GB (2,600MB/s) and 1.3GB/s (1,300MB/s) respectively.
Featuring the Phison E7 controller, BPX solid state drives use the NVMe interface to maximize bandwidth while lowering latency and power consumption for guaranteed peak performance under the heaviest workloads.
BPX drives empower gamers, enthusiasts, and professionals by opening a new realm of possibilities in the world of high-end computing while also an ideal solution for read-intensive enterprise servers and data center applications. Get the most out of your notebook / Ultrabook / NUC mini PC / All-In-One / desktop workstation; experience GB/s performance today with BPX.
NVMe (Non-Volatile Media Express) is an SSD storage interface that sheds the burden of legacy AHCI commands for uncompromised performance that saves power even throughout data-intensive workloads over a 5-year period.
With a lower latency than that of today's traditional hard disk drives and SATA SSDs, BPX drives create a more responsive computing experience.
MyDigitalSSD BPX drives use a four-lane PCI Express 3.0 (PCIe) interface to maximize your computing experience; delivering exceptional throughput performance and latency in this client solid state drive.
Built with scalability in mind, BPX drives are backwards compatible with PCIe 2.0 and 1.1; limited only by their respective bandwidths.
The PHISON E7 (PS5007-E7) controller is built to safeguard mission-critical data with end-to-end data path protection and a SmartECC™ engine to ensure data integrity during high-speed transfers. It also utilizes firmware algorithms such as SmartFlush™ and an optional P-fail circuitry to prevent in-flight data loss from sudden power interruptions, as well as advanced security features driven with a 256bit AES engine.
Additionally, the E7 controller supports NVMe L1 sub-state with less than 5mW in L1.2 low power mode, a key requirement for next-generation notebooks.
MyDigitalSSD BPX drives can be used as a boot device in a variety of systems with a free PCIe 2.0/3.0 M.2 socket, including Z97 / X99 / Z170 based motherboards, modern notebooks, and small form factor PC's like the Intel® NUC.
They can also serve as added ultra-high-speed storage in virtually any desktop with a spare PCIe slot combined with a PCIe adapter.
| Capacity : SKU: |
120GB : MDNVME80-BPX-0128 240GB : MDNVME80-BPX-0256 480GB : MDNVME80-BPX-0512 |
| Form Factor: | M.2 2280 (80mm) |
| Interface: | PCIe 3.0 x4 |
| Protocol: | NVMe 1.2 |
| Flash: | 2D MLC w/ 4-plane high-performance NAND |
| Controller: | Phison E7 (PS5007-E7) |
| Encryption: | AES 256-bit |
| Max Sequential Read: | 2.6GB/s / 2,600MB/s |
| Max Sequential Write: | 1.3GB/s / 1,300MB/s |
| 4K Random Read: | 35MB/s (CDM) |
| 4K Random Write: | 150MB/s (CDM) |
| Dimensions: | 80mm x 22mm x 3mm |
| Weight: | 8g |
| Operation Temperature: | 0 to 70°C |
| Storage Temperature: | -40 to 85°C |
| Shock: | 1500G/0.5ms |
| Vibration: | 80Hz~2000Hz/20G |
| Operating Voltage: | 3.3V |
| Power Consumption: | < 7 W |
| DEVSLP Mode: | L1.2 power state supported |
| Error Correction Code: | Supports ECC with 120bits/2KB BCH |
| Endurance: | Up to 1,400 TBW |
| MTBF: | >2,000,000 hours |
| RAID Support: | Yes |
| TRIM Support: | Yes |
| SMART Support: | Yes |
| Static & Dynamic Wear Leveling: | Yes |
| Bad Block Management: | Yes |
| ETE Data Path Protection: | Yes |
| Low Power Management DIPM/HIPM Mode: | Yes |
| Garbage Collection: | Automatic |
| Device Sleep Mode Support: | Yes |
| Software: | None |
| Compliance: | RoHS, FCC, CE, BSMI |
| Warranty: | 5-year limited warranty up to 1,400 TBW |