MyDigitalSSD M2X+ USB 3.1 Gen 2 Combo PCIe NVMe / SATA M.2 SSD Adapter Enclosure

M2X+ | PCIe NVMe (M-Key) / SATA (B+M-Key) M.2 SSD | USB 3.1 Gen 2

Transform your SATA or NVMe M.2 SSD into an ultra-fast ultra-portable pocket drive

The latest in the best-selling M2X series, the MyDigitalSSD M2X+ USB 3.1 Gen 2 M.2 SSD adapter enclosure offers both PCIe NVMe (M-Key) and SATA (B+M-Key) solid state drive compatibility with 80mm (2280), 60mm (2260), 42mm (2242), and 30mm (2230) form factors, ultra-high-speed data transfers, and the lowest power consumption yet for prolonged use and efficiency.

Featuring a durable yet lightweight aluminum housing with USB-C and USB-A connectivity, the M2X+ provides near-instant access of up to 2TB of data anywhere, anytime. Additionally, its award-winning heatsink design helps prevent SSD overheating and ensures peak performance even under heavy use.

The M2X+ is OS independent and fully bus-powered, creating a versatile external solid-state solution with a range of use including, high-speed storage, data backup, cloning an existing drive, running a mobile operating system, and more.

Get more from your M.2 SSD, pair it with the M2X+ today!

SuperSpeed+ USB 3.1 Gen 2 Performance

Backup and save files faster than ever over USB with the M2X+

Utilizing the Realtek RTL9210B chipset, the M2X+ offers PCIe NVMe speeds up to 10Gb/s and SATA speeds up to 6Gb/s with minimal power consumption connected to a Thunderbolt 3 or USB 3.1 Gen 2 port - double the transfer rate of USB 3.1 Gen 1.

The RTL9210B chipset also supports TRIM command for SSD and complies with USB Mass Storage Class Bulk-Only Transport (BOT) and USB Attached SCSI Protocol (UASP), maximizing the performance of any M.2 SSD used in the M2X+.

Additionally, the M2X+ is backward compatible with USB 3.1 Gen 1 (USB 3.0) and USB 2.0 devices at their respective data transfer rates.

Durable Lightweight Design Keeps SSD Safe and Cool

Built to protect your data at home or on the go, the M2X+ is an easy-to-carry enclosure, weighing less than 2 ounces, that features a sleek, crush-resistant aluminum housing that safeguards against shock and vibration.

Its grooved fin heatsink design aids heat dissipation during use to prevent overheating and thermal throttling*, ensuring a long life expectancy from your drive.

* For best results, use in combination with included thermal pad. Results may vary depending on environment.

Fully Bus-Powered

The M2X+ enclosure is powered directly through the USB port, eliminating the need to carry an additional power cord.

Plug and Play

Access your files from any USB-compliant notebook or device with this hot-swappable plug and play M2X+ enclosure. No additional drivers or software required.

USB-C and USB-A Compatible

Each MyDigitalSSD M2X+ includes two 9-inch USB 3.1 cables for hassle-free connectivity in either USB Type-C (USB-C) or USB Type-A (USB-A) devices.

Mounting Screw Kit

The M2X+ also includes M.2 SSD mounting screws with a mini screwdriver for quick and convenient drive installation.

Notes

1. MyDigitalSSD M2X+ adapter enclosures are NOT compatible with AHCI PCI-Express M.2 SSDs, M.2 PCIe devices including WiFi and capture cards, mSATA SSDs, or any other non-M.2 form factor SSDs.
2. Performance may be limited based on the file system, source data files, and system specifications.
3. SSDs removed from computers, or formatted on one system, may have OS-specific file systems not recognized by either Windows or macOS. exFAT file system format is recommended when working with both Windows and macOS computers.

MyDigitalSSD M2X USB 3.1 Gen 2 M.2 PCIe NVMe SSD Adapter Enclosure

M2X | 2280 / 2260 / 2242 M.2 M | PCIe NVMe | USB 3.1 Gen 2 Enclosure Adapter

The MyDigitalSSD M2X external USB 3.1 Gen 2 adapter enclosure allows users to bring NVMe speeds with them on the go by turning any PCIe M.2 M (M key) solid state drive into an ultra-portable pocket drive.

Featuring a durable lightweight aluminum casing with USB-C and USB-A connectivity, the M2X enclosure provides near-instant access of up to 2TB of data anywhere, anytime thanks to a grooved heatsink design that combats high heat issues commonly found in small form factor SSDs and ensures peak performance even under heavy use.

M2X enclosure adapters are compatible with 80mm (2280), 60mm (2260), and 42mm (2242) M.2 M form factors, OS independent, and fully bus powered for a variety of uses including high-speed storage, backing up data, cloning an existing drive, running a mobile operating system, and more.

Get more from your NVMe M.2 SSD, try an M2X today!

SuperSpeed+ USB 3.1 Gen 2 Performance

The M2X features JMicron's JMS583 USB 3.1 Gen 2 to PCIe Gen3 x2 bridge controller that offers data transfer speeds up to 10Gbps, double the transfer rate of USB 3.1 Gen 1 (USB 3.0).

The JMS583 controller also supports TRIM command for SSD and complies with both of USB Mass Storage Class Bulk-Only Transport (BOT) and USB Attached SCSI Protocol (UASP), maximizing the performance of any PCIe NVMe SSD used in the M2X.

Additionally, the M2X enclosure adapter is backward compatible with USB 3.0 (USB 3.1 Gen 1) and USB 2.0 devices at their respective data transfer rates.

Durable Lightweight Design Keeps SSD Safe and Cool

Weighing less than two ounces, the M2X features a sleek, compact, and crush-resistant aluminum casing that safeguards against shock and vibration while its grooved fin heatsink base aids heat dissipation for a cooling effect up to 15°C*, protecting drives from overheating and thermal throttling.

*When using the included silica gel thermal pad. Results may vary depending on environment.

Fully Bus-Powered

M2X enclosure adapters are powered directly through the USB port, eliminating the need to carry an additional power cord.

Plug and Play

Access your files from any USB compliant notebook or device with this hot-swappable plug and play M2X enclosure adapter. No additional drivers or software required.

Includes Two 12-inch USB 3.1 Cables

Each MyDigitalSSD M2X includes two foot-long USB 3.1 cables for plug and play connectivity in either USB Type-C (USB-C) or traditional USB Type-A (USB-A) ports.

Mounting Screw Kit

M2X enclosure adapters also include a mini screwdriver and M.2 mounting screw pack for quick and convenient drive installation.

Note: MyDigitalSSD M2X NVMe USB 3.1 Gen 2 enclosure adapters are NOT compatible with SATA, AHCI PCIe, or B key NVMe PCIe M.2 SSDs.

08/10/20

Firmware Version 0209 for MyDigitalSSD M2X Adapter w/ JMicron JMS583 Controller
344KB | OS: Windows 7 and up

Users can upgrade directly to FW version 0206 from versions 0203, 0204, 0205, or 0206. No additional updates necessary.

Note: Remove SSD from enclosure before performing the update.

MyDigitalSSD UX Universal M.2 PCIe NVMe SSD to PCI Express 3.0 x4 Adapter Card

UX | 2280 / 2260 / 2242 / 2230 NVMe M.2 SSD | PCI Express 3.0 x4 Lane Host Adapter

No M.2 port? No problem. The MyDigitalSSD UX Universal adapter card helps expand storage and improve performance of your server, desktop PC, or small form factor computer by mounting any NVMe M.2 SSD in any PCIe bus slot.

With PCI Express 3.0 support and +3.3V/3A power, the UX adapter card offers full and unrestricted bandwith to take advantage of NVMe speeds up to 32Gb/s (using a PCIe x4 slot) and optimize your computer's efficiency, allowing you to get more done in less time.

Compatible with PCIe Gen3 and PCIe Gen2 M.2 SSDs in 80mm (2280), 60mm (2260), 42mm (2242), and 30mm (2230) form factors thanks to an adjustable stand-off and multiple mounting holes, UX adapter cards are OS independent with no drivers required, for a fast, hassle-free setup by plugging into a PCIe x4, x8 or x16 slots in today's hottest motherboards.

Each UX adapter card comes equipped with a full-height bracket and includes a half-height low-profile bracket, screwdriver, and M.2 mounting screw pack for quick and convenient installation in PC cases of all sizes.

Additionally, the MyDigitalSSD UX adapter card also provides peace of mind as a simple and cost-effective way to access and recover data from M.2 drives pulled from other laptops or computers in cases of hardware failure or to simply continue using the drive for storage and backup purposes.

Features

• Supports 2280 / 2260 / 2242 / 2230 PCIe Gen3 and PCIe Gen2 M.2 NGFF
• Supports double sided SSDs with a bottom height up to 1.25mm
• Compatible with PCIe 1.0, PCIe 2.0, and PCIe 3.0 motherboards
• Fits in any PCIe x4, x8, x16 slot
• +3.3V/3A power supply
• Individual LED displays for power and data transfer status
• Compliant with 39Gbps PCI Express 3.0
• Supports high and low-profile form factors
• Transparent to the operating system; no driver installation required
• Supports all OS: Windows / Mac / Linux / etc.
• Fully RoHS compliant
• 1 Year Warranty

Note: The UX adapter is designed to work only with M key M.2 PCIe SSD. It is NOT compatible with B key PCIe or B key SATA M.2 SSDs.

MyDigitalSSD BOOST USB 3.1 SuperSpeed Plus UASP Dual mSATA SSD RAID Enclosure

BOOST Series | 50mm mSATA | 25mm mSATA Mini | USB 3.1 SSP UASP | Mobile RAID

The MyDigitalSSD BOOST USB 3.1 SuperSpeed Plus (SSP) enclosure turns any full-size 50mm or half-size 25mm mSATA SSD into an ultra-portable external storage device, or any two mSATA SSDs into a mobile hardware RAID solution.

Ideal for backing up primary drives, accessing data/apps on the go, high-speed file transfer between devices, expanding your current storage, or running a mobile operating system - the MyDigitalSSD BOOST enclosure helps get more from your mSATA drive(s).

USB 3.1 SuperSpeed Plus (SSP)

The MyDigitalSSD BOOST enclosure is designed to maximize performance of any mSATA SSDs by utilizing 10Gbps USB 3.1 SuperSpeed Plus (SSP) connectivity.

Additionally, USB 3.1 standard is backward compatible with USB 3.0/2.0/1.1 host connections for use in virtually any USB device.

UASP Support

Enhanced with UASP (USB Attached SCSI Protocol) support, the BOOST enclosure offers transfer speeds up to 70% faster than traditional USB 3.0 in UASP-enabled host devices by reducing latency and processor usage to utilize the full potential of the mSATA drive(s) inside it. The results of which is near-instant access to your data anytime, at home or on the go.

Durable Compact Design

No bigger than the average wallet, the MyDigitalSSD BOOST mSATA enclosure features a lightweight, crush resistant aluminum casing that safeguards against shock and vibration for optimum data protection in any environment.

Bus-Powered

BOOST mSATA enclosures are powered directly through the USB port, eliminating the need to carry an additional power cord.

Plug and Play

Access your files from any USB compliant notebook or device with this hot-swappable plug and play BOOST SSD enclosure. No additional drivers or software required.

RAID or Non-RAID Options

Fit the BOOST with two mSATA SSDs and take control of how your data is stored.

Choose between a RAID 0 configuration that maximizes speed and capacity by spreading data across both drives or a RAID 1 configuration that mirrors your data on both drives to secure your files if one should ever fail.

Non-RAID options are also supported with SPAN and JBOD mode.

Data Backup Made Easy

Pair the MyDigitalSSD BOOST mSATA enclosure with your favorite cloning or imaging software to quickly and effortlessly copy your data from one drive to another. Utilizing the enclosure's customizable storage capacity and blazing fast USB 3.1 transfer speeds, users can manage their data in any way they see fit at a fraction of the time of external USB 3.0 hard drives.

Includes 2 18-inch USB Cables

Each BOOST enclosure includes two 18" USB cables to maximize connectivity. One, a 3.0 (USB 3.1 Gen 1) USB-A to Micro-B cable for use in any standard USB port. The other, a 3.1 USB-C to Micro-B cable for use in newer desktops, expansion cards, laptops, and mobile devices that have a USB-C port.

Features

• 50mm (Full) and 25mm (Half Size) mSATA SSD compatibility
• Durable matte black/red aluminum casing with silver trim
• ASMedia ASM1352R Chipset
• USB3.1, USB3.0, USB2.0, and USB1.1 operation support
• Supports H/W RAID 0, RAID 1, SPAN, and JBOD modes
• Compliant with USB 3.1 specification revision 1.0
• Compliant with USB 2.0 specification revision 2.0
• Compliant with Serial ATA specification revision 3.2
• Windows, Linux, and Mac OS support
• TRIM/UNMAP support
• Plug and play
• Hot swappable

MyDigitalSSD M.2 NGFF to 2.5" SATA III/6G SSD Adapter Enclosure

Turns any SATA M.2 NGFF SSD into a 2.5" SATA SSD

The MyDigitalSSD universal M.2 NGFF to 2.5" SATA enclosure adapter is designed to enable any SATA II or SATA III (6G) 30mm (2230), 42mm (2242), 60mm (2260), or 80mm (2280) M.2 solid state drive to be used as a direct replacement for a 2.5" SATA hard drive - giving users the ability to capitalize on the high speed, durability, shock resistance, and low power consumption of an SSD in any notebook or desktop computer with a standard SATA port.

Once installed, the M.2 appears as an ordinary SATA hard drive to any OS and can be configured as a boot device.

Features

• Enable M.2 NGFF SSD to be used like ordinary 2.5" SATA HDD/SSD
• Convert M.2 connector to SATA connector
• Compatible with SATA II and SATA III 6G mSATA drives
• Compatible with port multiplier
• Mounts directly onto notebook hard drive bay with SATA connector
• Can be mounted onto any 3.5" drive enclosure, 3.5" drive bay, 2.5" drive enclosure, slim CD drive bay with mounting brackets
• Can be the primary bootable device containing the OS and applications

MyDigitalSSD Bullet Proof 4 (BP4) USB 3.0 mSATA SSD Enclosure

BP4 | 50mm mSATA | 25mm Half Size mSATA Mini | SuperSpeed USB 3.0 Enclosure Adapter

MyDigitalSSD's Bullet Proof 4 (BP4) USB 3.0 mSATA Adapter Enclosure allows users to turn almost any SATA 50mm mSATA or 25mm Half Size mSATA Mini SSD into an ultra portable external storage device.

Small enough to fit in your pocket, the BP4 USB 3.0 mSATA Enclosure is great for cloning an existing HDD/SSD to a new one, backing up data, or accessing files on older drives after upgrading.

Features

• Speeds up to 500MB/s with USB 3.0 UASP
• Supports SATA I, II & III/6G mSATA SSDs
• Great for cloning new mSATA Drives
• Compatible with USB 3.0 & USB 2.0
• Plug and Play with PC or Mac

Solid State Drive not included.

Note: Optimum speeds will be had when plugged into a USB 3.0 port with UASP support. This device is also backwards compatible, meaning it can be used in USB 2.0 ports at USB 2.0 transfer rates.

MyDigitalSSD Bullet Proof USB 3.0 2.5" SATA HDD/SSD Enclosure

MyDigitalSSD's Bullet Proof enclosure turns any 2.5 inch SATA (I, II, or III/6G) Hard Drive (HDD) or Solid State Drive (SSD) into an ultra portable storage device. Stylish and durable, this external USB 3.0 enclosure is great for cloning an existing drive to a new one or backing up data after upgrading your PC or Mac.

Bullet Proof enclosures are completely bus powered, meaning no bulky AC adapter. Simply tuck the enclosure and connecting cable into the included carrying sleeve to be prepared for virtually any mobile data need - having your music, photos, and personal data at your fingertips whenever you are.

Features

• Durable and stylish design - black brushed aluminum with silver trim
• Supports 2.5 Inch Serial ATA (SATA) I/II/III drives
• ASMedia 1053 USB 3.0 Controller
• Compliant to USB 3.0 specifications
• Compliant to USB 2.0 specifications
• Supports SATA I/II and 6G SSDs
• Hot-swappable
• Plug and Play (PnP)

Hard Drive/Solid State Drive not included.

Note: Optimum speeds will be had when plugged into a USB 3.0 port. This device it is also backwards compatible, meaning it can be used in USB 2.0 ports at USB 2.0 transfer rates.

MyDigitalSSD Bullet Proof USB 3.1 M.2 NGFF Enclosure Adapter

MyDigitalSSD Bullet Proof SuperSpeed USB 3.1 M.2 NGFF Enclosure | Supports UASP

Use this universal enclosure to turn any 30mm (2230), 42mm (2242), 60mm (2260), or 80mm (2280) SATA M.2 NGFF SSD into an external USB 3.1 portable storage device. Slim enough for to fit in your pocket, the Bullet Proof enclosure adapter is great for cloning your existing drive to a new one or making use of your old drive after upgrading.

Note: Optimum speeds will be had when plugged into a USB 3.1 port. This device it is also backwards compatible for use in USB 3.0 and USB 2.0 ports at the maximum transfer rates each port allows.

Features

• ASMedia 1351 USB 3.1 Controller with UASP Support
• Slim and stylish design - matte black with silver trim
• Durable aluminum casing
• Supports 30mm (2230), 42mm (2242), 60mm (2260) & 80mm (2280) M.2 NGFF form factors
• Compliant to USB 3.0 specifications
• Compliant to USB 2.0 specifications
• Supports SATA I/II and 6G SSDs
• Hot-swappable
• Plug and Play (PnP)

MyDigitalSSD mSATA to SATA II/III SSD Adapter with Tower Brackets

This MyDigitalSSD mSATA to 2.5" SATA Adapter allows users to operate one mSATA (II or III/6G) SSD, originally intended for tablets and notebooks, in any desktop or tower PC with a standard SATA (I, II, III/6G) connection.

Use of this adapter delivers maximum speed and performance allowed by your PC when using an mSATA SSD as either a boot drive (to run an operating system) or cache drive (in tandem with a hard drive).

This adapter is designed for mSATA SSDs only.

It is NOT compatible with 50mm Mini PCI-e SATA SSDs.

MyDigitalSSD mSATA to 2.5" SATA III/6G SSD Adapter Enclosure

Turn any SATA II or SATA III (6G) mSATA SSD into a 2.5" SATA SSD

The MyDigitalSSD mSATA to 2.5" SATA Enclosure Adapter is designed to enable a 50mm mSATA solid state drive to be used as a direct replacement for a 2.5" SATA hard drive, giving users the ability to capitalize on the high speed, durability, shock resistance, and low power consumption of an SSD in any notebook or desktop computer with a standard SATA port.

Once installed, the mSATA appears as an ordinary SATA hard drive to any OS and can be configured as a boot device.

Features

• Enable mSATA SSD to be used like ordinary 2.5" SATA HDD/SSD
• Convert mSATA connector to SATA connector
• Compatible with SATA II and SATA III 6G mSATA drives
• Compatible with port multiplier
• Mounts directly onto notebook hard drive bay with SATA connector
• Can be mounted onto any 3.5" drive enclosure, 3.5" drive bay, 2.5" drive enclosure, slim CD drive bay with a mounting brackets
• Can be the primary bootable device containing the OS and applications

MyDigitalSSD Bullet Proof USB 3.1 mSATA SSD Enclosure Adapter

MyDigitalSSD Bullet Proof SuperSpeed USB 3.1 mSATA Enclosure | Supports UASP

Use this enclosure to turn any 50mm mSATA (II or III/6G) SSD into an external USB 3.1 portable storage device. Small enough for to fit in your pocket, the Bullet Proof enclosure adapter is great for cloning your existing drive to a new one or, simply, making use of your old drive after upgrading.

Note: Optimum speeds will be had when plugged into a USB 3.1 port. This device it is also backwards compatible for use in USB 3.0 and USB 2.0 ports at the maximum transfer rates each port allows.

Features

• ASMedia 1351 USB 3.1 Controller with UASP Support
• Slim and stylish design - matte black with silver trim
• Durable aluminum casing
• Adapter board clips hold drive securely and allow for fast drive swapping
• Supports 50mm and 25mm mSATA drives
• Compliant to USB 3.0 specifications
• Compliant to USB 2.0 specifications
• Supports SATA I/II and 6G SSDs
• Hot-swappable
• Plug and Play (PnP)

This enclosure is designed for mSATA SSDs only.
It is NOT compatible with 50mm Mini PCI-e SATA SSDs.

MyDigitalSSD Better USB 3.0 mSATA / 2.5" SATA SSD Enclosure

MyDigitalSSD USB 3.0 External 2.5" SATA SSD/HDD Enclosure with 50mm mSATA Adapter

Use this enclosure and adapter to turn any 50mm mSATA SSD or 2.5" SATA hard drive/solid state drive into an external USB 3.0 portable storage device. 

Features

• Slim design with Black with Silver Trim
• Supports 50mm and 25mm mSATA SSDs
• Supports most 2.5-inch SATA hard drives and SSD drives
• Aluminum case enclosure
• Compliant to USB 3.0 specifications
• Compliant to USB 2.0 specifications
• Supports SATA I/II and 6G hard drives / SSDs
• Hot Swappable
• Plug and Play

About the Enclosure

MyDigitalSSD's slim aluminum enclosure and adapter combo is great for cloning your existing drive to your new one or, simply, making use of your old drive after upgrading to a new one. Optimum speeds will be had when plugging this device into a USB 3.0 port but it is also backwards compatible, meaning it can be used in USB 2.0 ports at USB 2.0 transfer rates.

About the Adapter

The MyDigitalSSD mSATA to 2.5" SATA Adapter allows users to operate one mSATA (II or III/6G) SSD, made for tablets and notebooks, in any device with a standard 2.5" SATA (I, II, III/6G) connection.

Whether you're plugging the adapter into the included USB 3.0 Enclosure or a standard SATA port (notebook/desktop/workstation), the mSATA drive will deliver maximum speed allowed by the device it's being used in for optimum performance.

This adapter is designed for mSATA SSDs only. It is NOT compatible with 50mm Mini PCI-e SATA SSDs.

Note: Adapter and Enclosure also sold separately.