MyDigitalSSD SBXe Single Sided 80mm (2280-S2-M) M.2 PCI Express 3.1 x4 (PCIe Gen3 x4) NVMe SSD Solid State Drive

SBXe | M.2 2280-S2-M | PCIe 3.1 x4 NVMe SSD | PHISON E13T Controller

RAISING EXPECTATIONS

MyDigitalSSD Super Boot eXpress Eco (SBXe) PCIe 3.1 x4 NVMe M.2 SSDs look to raise the expectations of what consumer-grade performance can be by delivering up to 4X the speed of SATA SSDs with max sequential transfer rates of 2,500MB/s (2.5GB/s) read and 2,100MB/s (2.1GB/s) write.

Powered by the Phison E13T (PS5013-E13T) controller, SBXe solid state drives pair 3D NAND flash with the NVMe 1.3 interface to maximize bandwidth and boost system responsiveness while lowering latency and power consumption for sustained performance under any workload.

Get more out of your desktop, notebook, or 2-in-1 by upgrading to an SBXe today.

PHISON E13T CONTROLLER

The Phison E13T controller was designed to provide an enhanced user experience at a competitive cost, without sacrificing quality. The E13T safeguards data with end-to-end data path protection, thermal throttling, and a powerful low-density parity-check (LDPC) ECC algorithm for improved drive reliability - preventing data corruption while maintaining peak performance and low power consumption.

Additionally, the E13T controller supports APST, ASPM, and L1.2 power saving modes to maximize notebook battery life along with the Secure Erase command to sanitize all user data and restore factory settings.

OP FOR TOP PERFORMANCE

Super Boot eXpress Eco series SSDs dedicate a small allotment of NAND flash to assist the E13T controller in maximizing performance and IOPS when managing program/erase (P/E) cycles.

This method of over-provisioning helps maintain peak performance with enhanced reliability and endurance throughout the life of the drive.

PCI EXPRESS® GEN 3 x4 INTERFACE

MyDigitalSSD SBXe SSDs use a four-lane PCIe 3.1 interface for an improved computing experience; delivering optimal throughput performance and latency for a consumer solid state drive.

Built with scalability in mind, SBXe drives are backwards compatible with PCIe 3.0, 2.0 and 1.1; limited only by their respective bandwidths.

NVM EXPRESS® REVISION 1.3

Designed from the ground up to deliver high bandwidth and low latency storage access, NVMe revision 1.3 fully utilizes the benefits of non-volatile memory that improves sequential and random speeds to meet today's high-performance computing demands.

Unlike most SATA-based solid state drives, the Super Boot eXpress Eco series offers users uncompromised performance that saves power even when faced with data-intensive workloads.

POWER AND VERSATILITY

MyDigitalSSD SBXe drives can be used as a boot device in a variety of systems with a free PCIe 2.0/3.0 M.2 socket, including Z97 / X99 / Z170 / Z270 based motherboards, modern notebooks, and small form factor PCs like the Intel® NUC.

They can also serve as added ultra-high-speed storage in desktops with a spare PCIe slot combined with a PCIe adapter.

SINGLE SIDED DESIGN

Featuring a thin single-sided M.2 2280 form factor, MyDigitalSSD SBXe SSDs increase storage capacity while saving space for other components in any ultra-portable laptop or desktop workstation with an M.2 connection.

SPREAD THE WORD

Share your SBXe experience with others using hashtag: #SBXeSSD


Features


Specifications

Capacity : SKU 120GB : MDNVME80-SBXe-0128
240GB : MDNVME80-SBXe-0256
480GB : MDNVME80-SBXe-0512
960GB : MDNVME80-SBXe-1T
Form Factor: M.2 2280-S2-M
Interface: PCIe 3.1 x4
Protocol: NVMe 1.3
Flash: TLC 3D NAND
Controller: Phison E13T (PS5013-E13T)
Max Sequential Read: 120GB: 1550MB/s
240GB: 1700MB/s
480GB: 1700MB/s
960GB: 2500MB/s
Max Sequential Write: 120GB: 550MB/s
240GB: 1100MB/s
480GB: 1550MB/s
960GB: 2100MB/s
4K Random Read: 120GB: 100K IOPS
240GB: 180K IOPS
480GB: 270K IOPS
960GB: 295K IOPS
4K Random Write: 120GB: 130K IOPS
240GB: 250K IOPS
480GB: 340K IOPS
960GB: 430K IOPS
Dimensions: 80mm x 22mm x 2mm
Weight: < 7g
Operation Temperature: 0 to 70°C
Storage Temperature: -40 to 85°C
Shock: 1500G/0.5ms
Vibration: 80Hz~2000Hz/20G
Operating Voltage: 3.3V, +/- 5%
Power Consumption Idle: < 50 mW
Power Consumption L1.2: < 2 mW
Error Correction Code: LDPC Gen 4 + RAID
Endurance: 120GB: 90 TBW
240GB: 180 TBW
480GB: 360 TBW
960GB: 720 TBW
TRIM Support: Yes
SMART Support: Yes
Static & Dynamic Wear Leveling: Yes
Bad Block Management: Yes
End-to-End Data Path Protection: Yes
Power Management Support: APST, ASPM, L1.2
Garbage Collection: Automatic
Compliance: RoHS / FCC / CE
Warranty: 5-year limited warranty up to 720 TBW